Thermal oil furnace cleaning agent is specially used to clean heavy oil scale, oil coke, sludge in thermal oil heat exchange equipment, as well as oxidized oil scale and carbon deposits formed in various thermal oil furnaces. Thermal oil furnace cleaning agent is composed of a variety of high-quality surfactants and organic additives. It has excellent permeability, emulsification and ability to remove oil coke. It has excellent solubility in water and is simple and convenient to use. , safe and non-corrosive, can be discharged directly after use. When using thermal oil furnace cleaning agent to clean thermal oil heat exchange equipment, it can significantly reduce cleaning costs, save cleaning expenses, reduce environmental pollution, and have a short-term anti-rust effect on the cleaned pipelines. This product has passed the environmental protection test and complies with EU standards.
Product Features
Quickly remove grease and carbon deposits on internal pipes and heat exchangers of thermal oil furnaces.
, neutral, non-toxic and non-corrosive process, completely harmless to the internal pipes of the thermal oil furnace and the metal heat transfer surface of the heat exchanger.
It dissolves oil dirt and oil coke quickly and completely without leaving any residue.
, easy and convenient to use, no need for professionals to operate, just follow the instructions for use.
Concentrated product, dilute with water twice to use, greatly reducing cleaning costs when cleaning thermal oil furnaces.
, completely environmentally friendly, the product is odorless, non-toxic, non-flammable, non-corrosive to the object being cleaned, has little irritation, does not damage the skin, and can be discharged directly after cleaning.
How to use
Drain the old oil. Use the heating system to heat the heat transfer oil to ℃, and discharge all the heat transfer oil in the system while it is hot. According to the conditions, the residual oil in the system can be released as much as possible. If it cannot be released, add cleaning agent to remove the oil through penetration, stripping, and dissolution. After being diluted, it is discharged out of the boiler.
Add the cleaning agent and water to the high-level tank, start the circulation pump for circulation, and use the heating furnace to heat the cleaning agent to ℃℃. The entire cleaning time is no less than an hour.
. Water washing. Fill the system with clean water, turn on the circulation pump for circulation, and use the heating furnace to raise the water temperature to ℃℃, so that all parts of the system can be circulated separately. Rinse the system and, after an hour, open all low-level blowdown valves on the boiler to drain the water from the system. Rinse thoroughly.
. Add new oil. Inject new heat transfer oil into the system.
The dehydration method of dehydration is the same as the dehydration standard before use of the new system.
、Normal operation The system is put into normal operation.
Packaging and storage in kilograms and kilograms in plastic drums
Shandong thermal oil furnace cleaning agent is non-toxic and pollution-free